|
|
Broken towel bar - broken towel rod ?
Lenape Replacement parts
Fine porcelain bath hardware replacement items
|
|
To view images of the various Lenape collections, please select from the links above or way below.
Just replacement parts shown on this
page.
|
|
Re-Place-A-Bars (all 4 part numbers are STOCKED items)
for broken towel rods in your shower or tub area.
Got a broken shower bar? Need a replacement shower bar?
White and clear shower bars below. 24" or 36" lengths, can cut to size.
(Only need to saw out the old bar if it is still in place. Most likely it is not.)
Please print or make note of these instructions.
Re-Place-A-Bars are now packaged WITHOUT the above instructions.
Please bookmark this page or print it out for your reference.
PLEASE READ: COMMON QUESTIONS ABOUT THE RE-PLACE-A-BARS.
Yes, the bar itself is 24" or 36". It can be cut down to any size under 24" or 36". It is not meant to rest on the spring loaded ends. The spring loaded ends center the bar between the posts. The plastic bar
can be cut with a hack saw or a miracle kitchen knife. The spring loaded ends are removeable from each end and can be re-inserted in each end. It is square tubular plastic. Please see the picture
directly below for its measurement. Re-Place-A-Bars are meant for replacements where your posts are glued to the wall and cannot be removed.
THE SPRING LOADED ENDS "DO" COME WITH THE BAR AND ARE REMOVEABLE.
*** The length that you want to cut your bar to is:
the distance between the two posts plus the recessed indentation of one of the posts. Thus if you have 22" between your posts, and the square or diamond shaped hole is 9/16" deep, you want your
bar to be 22-9/16". When you compress one spring loaded end to insert it into the first post, then slip the bar to the inside of the second post and let go, the spring loaded ends will self-center the bar,
and then the bar rests upon itself within the posts.
The spring loaded ends only self-center the bar, they do not support it "vertically."
To order Re-Place-A-Bars ON-LINE, please select this link.
We always try to keep large quantities of all in STOCK.
WE PREFER that you place Re-Place-A-Bar orders on-line, or by FAX.
Orders for Re-Place-A-Bars that are phoned in will be subject to an extra $5 fee for phone time. All the
information about Re-Place-A-Bars is on this page. This is why we try to post as much information as possible to save you time and to save us time from being on the phone answering the above questions. Thank you.
**** ALMOST ALL Re-Place-A-Bar orders are shipped via US Priority Mail. When ordering, please make sure you provide a
shipping address that you receive mail at. Thanks.
Bars measure approx. 13/16" square. That's just over 3/4".
Plastic bars can be cut to length! Spring loaded removable ends.
Available in 24" or 36" lengths. Color choices: 00 Clear, 01 White, 02 Black*.
|
Size/color
|
Clear
|
White
|
Black
|
|
24" $12.17 each
|
LEN-2024-00
|
LEN-2024-01
|
COMPLETELY
SOLD OUT
|
|
36" $12.79 each
|
LEN-2036-00
|
LEN-2036-01
|
|
*black ARE COMPLETELY SOLD OUT AND DISCONTINUED.
When ready to order: via On-line, click here ~ via FAX, click here
.
Bars are 13/16" square plastic, (just over 3/4").
White are a solid color, non-see though. Clear are transluscent and you can see the rib lines in them.
The 24" and 36" bars can be easily cut to the length you need with
a hacksaw or "miracle kitchen knife."
To order Re-Place-A-Bars ON-LINE, please select this link.
Stocked items.
|
|
Oval (D-shaped) plastic towel ring (Clear) (stock item)
Fits Lenape towel ring numbers: 426, 526, and 826 from the Carrousel and Classic series.
Part # LEN-640 or can be ordered as part number ACP-clear ring. D-ring measures 4-5/8" tall by 6-1/8" wide.
We are now bringing them in from AC Products because Lenape has stopped carrying them.
Fits all AC Products towel rings also.
$9.57 each.
Orders for the LEN-640 or ACP-clear ring that are phoned in will be subject to an extra $5 fee for phone time. All the information about the clear D-ring replacement is listed above. We try to post as
much information as possible to save you time and to save us time from being on the phone answering the above questions. Thank you.
Round metal towel rings (stock items)
Fits Lenape towel ring numbers: 126, 426, 526, 606, and 826 from all Lenape collections.
Available in White, Bone, Brushed Nickel, or Polished Chrome.
Part #'s LEN-642-01, LEN-642-17, LEN-642-96, LEN-642-72 $8.59 each.
Lenape Classic Series uses a full round white or bone ring. The Meridian Series uses the white ring. The
Athena series uses the white, brushed nickel, and polished chrome rings. These round rings can also be used for the Carrousel Series towel ring as demonstrated below.
These rings are tougher than the clear D-ring and very doubtful that they would ever break.
Round rings MEASURE 6-1/4" in overall diameter.
Orders for the LEN-642-xx that are phoned in will be subject to an extra $5 fee for phone time. All the information about the round ring replacements is listed above. We try to post as much information as
possible to save you time and to save us time from being on the phone answering the above questions. Thank you.
When ready to order: via On-line, click here ~ via FAX, click here
.
Toilet paper rollers - spring loaded (White only now) (stock items)
Fits Lenape toilet paper holders for all series. White plastic roller, spring loaded.
LEN-660-01 $.96 each - white.
Orders for the LEN-660-01 that are phoned in will be subject to an extra $5 fee for phone time.
There is not much information to post about these. They are just toilet paper rollers.
|
|
Towel Bar porcelain ends (posts) - sold as pairs (popular colors are stock items)
|
Part Number
|
Description
|
white or bone only
|
|
LEN-449-color
(01 white, 17 bone)
|
Fits 425, 436 and 424 (towel bars and TP holder)
|
$17.75 pair
|
|
|
|
Towel Bars - oval plastic, & round metal bars
any of the below can be cut to length
|
Part Number
|
Description
|
white or bone only
|
|
LEN-546-color
(01 white, 17 bone)
|
Fits old 825 24" towel bar - OVAL - plastic
Also fits really old 525, 520 towel bar posts that have oval shaped openings instead of round.
|
$12.09
|
|
LEN-556-color
(01 white, 17 bone)
|
Fits 525 24" towel bar - round - metal
|
$10.39 each
|
|
|
|
The "-color" in the part numbers above is a place holder for the COLOR CODES.
The 556 are painted metal bars, available in white
(01) or bone (17) only.
The 546 is the OVAL shaped plastic bar, available in white and bone.
This is the older style bar before Lenape had converted to the round bars.
All towel bars will come with two clips, 4 screws, and 4 drywall anchors. Drywall anchors can be used in a
drywall or ceramic tile surface mount applications. TP holders, soap dishes, toothbrush holders, towel rings,
and robe hooks will come with one clip, 2 screws, and 2 drywall anchors. 2-piece TP holders will have two clips.
These clips are used on the Athena, Meridian, Carrousel, and Classic, and Classic Blossoms collections.
Clips measure 1-1/8" across, 1-1/4" tall, and the screw hole ctc is 1". Thickest portion of clip on taper is 5/16" thick.
This is "Lenape's" clip. If you have another brand of bath hardware, we do not know if this clip will fit. Measurements above.
Part # LEN-621-98 @ $3.39 per clip. Sold individually.
Orders for the LEN-621-98 that are phoned in will be subject to an extra $5 fee for phone time.
We encourage you to place your order on-line. All information about the clip is above.
This is Lenape's only mounting clip, besides the corner clip used on the model 888 corner shelves.
Please e-mail us if you have any questions.
|
|
Replacement part ordering information:
Please state the Lenape item number and quantity desired. Color availability is shown in the grid below, and on the individual collection pages. Please note your color choice from the color groups listed below:
|
standard colors
|
|
00 clear (bar only)
01 white
02 black
17 bone
|
|
|
|
UNIFORM DECORATIVE HARDWARE NAVIGATOR
|
|
|
Return to first
Lenape Collection
|
Change
brands
|
|
|
|
|
