|
Woodmont Doors
Series 100 mitered corner raised panel wood cabinet doors |
Series 100 raised panel mitered corner doors and series 300 plywood panel mitered corner doors will both be shown on this web page. When side cut out views of the special frames for mitered corner doors
are available, we will post those images on our web site. All frame and edge choice combinations are identical in series 100 and 300. Series 300 just has flat plywood panels instead of raised panels.
|
Design 125 door shown with #2 panel and default edge for
design 125. Shown in Natural Maple finish.
Min. width 7-1/2", min. height 7-1/2".
|
Design 142 door shown with #6 panel and default edge for
design 142. Shown in Cider Cherry finish.
Min. width 7-3/4" x min. height 7-3/4".
|
Design 144 door shown with #6 panel and default edge for
design 144. Shown in Cider Maple finish.
Min. width 7-3/4" x min. height 7-3/4".
|
Design 350 door shown with flat PLYWOOD panel and the
RB edge choice. Shown in unfinished maple.
Min. width 6-1/2" x min. height 6-1/2".
|
Design 385 door with 'B' plywood panel and PRE edge
choice. Shown in Espresso Maple finish with almond glaze.
Min. width 6-1/2" x min. height 6-1/2".
|
Design 385F drawer front with 'B' plywood panel and PRE edge choice. Shown in Espresso Maple finish with almond glaze.
Please note, the 385F drawer front has a minimum height
requirement of 6-1/2". If you have drawer fronts less in height and would like a matching beaded panel look, order them as 385FC. The 385FC has a minimum height requirement of
5-1/2". And drawer fronts under 5-1/2" in height will need to be requested as the 500-(edge choice) slab drawer fronts. As for door designs 125, 142, and 144, matching drawer front
choices are 125F, 142F, and 144F with a minimum height requirement equal to that shown beneath each door picture above. Drawer front designs 125FC, 142FC, and 144FC have minimum height requirements of 5-3/4".
All drawer fronts max. width is 48", max. height is 12". We will update this further when more information is provided. |
Door style selections:
These are side cut views showing how the frames look (inside and outside). Then you will select a panel profile from the second picture down.
Panel profiles for the above RAISED PANEL door designs: 125, 135, 140, 142, 144, 150, 166, 175, and 185.
For Series 300 doors, these will have a plywood panel. Your plywood panel options are smooth or beaded. The beaded
plywood panel is not the same panel as the beaded raised panel choice. The beaded raised panel choice technically is not a raised panel, but it is thicker and solid wood.
|
All doors are available in Red Oak, Maple, Cherry or Hickory woods. Paint grade available too.
Doors can be ordered unfinished, or you can request finishing from the choices below.
If you would like a glazed finish, glaze colors are chocolate, bronze, mocha, and almond.
Paint grade doors come unfinished only, they are fine sanded and ready for you to paint.
PLEASE NOTE: Finish choices are restricted by wood species.
Autumn Oak, Nutmet Oak, Harvest Oak, and Charcoal Oak are Oak wood finish options.
Harvest Maple, Natural Maple, Toffe Maple, Ginger Maple, Champagne
Maple, Cider Maple, Cordovan Maple, and Espresso Maple are Maple wood finishes.
Cider Cherry, Cordovan Cherry, Ginger Cherry, and also Natural Cherry are Cherry wood finishes.
Cider Hickory, Natural Hickory, and Autumn Hickory are Hickory wood finishes.
|
If you would like your doors bored for concealed 35mm cup hinges,
please select boring option #1 or option #2 as shown below.
Hinges for 1/2" overlay on a face frame edge mount are available from Woodmont Doors.
Hinge boring is $2.10 per door, conceal hinges WD-900CD are $5 per pair.
To view actual pictures of the hinges, and other concealed hinge options, please select this link.
|
How to calculate square footage:
Multiple your width in inches by your height in inches, divide by 144, round off to the second decimal place.
Example: your door is 15-7/8" wide x 27-9/16" tall. (15.875 x 27.5625)/144 = 3.04 sq. ft.
If you are uncertain how to determine the decimal equivalent of a fraction,
just divide the top number by the bottom number.
Examples: 7/8 is 7 divided by 8 = .875. Or 13/16 is 13 divided by 16 = .8125. Square foot calculations for frame only or mullion doors is different and described on the mullion door page. How to calculate the price of a door or drawer front:
Take the square foot pricing from the chart below and multiply by the sq. ft. calculation.
Doors over 48" tall or 26" wide carry a $7.00 per sq. ft. oversize charge. If over 48" tall and 26" wide, they will have an
upcharge of 21.00 per sq. ft.
**Door using the B panel, V panel, or B plywood panel are $5.60 more per sq. ft. from the prices shown in the charts below.
How to calculate shipping on doors, drawer fronts, and plywood:
Within the continental 48 US States, $1.20 per sq. ft. no matter what door design or wood choice.
A $10 minimum shipping charge applies to all small orders under 8.35 square feet. Please remember, we will quote out your request for you if you would like to submit your information on-line. Pricing: |
SQUARE FOOT pricing for "unfinished" doors and drawer fronts:
(note: if B or V panel selected, pricing is $5.60 more per sq. ft.)
Door/DF design |
Red Oak |
Maple |
Cherry &
Hickory |
paint grade
w/MDF panel |
paint grade
w/ wood panel |
125, 130, 135, 140, 150, 175, 185 |
$21.56 |
$26.46 |
$27.30 |
$21.17 |
$23.81 |
142, 144, 166 |
$35.00 |
$40.32 |
$41.30 |
$32.26 |
$36.29 |
125F, 130F, 135F, 140F, 150F, 175F, 185F |
$32.76 |
$37.66 |
$38.50 |
$32.37 |
$35.01 |
142F, 144F, 166F |
$46.20 |
$51.52 |
$52.50 |
$43.46 |
$47.49 |
125FC, 130FC, 135FC, 140FC, 150FC, 175FC, 185FC |
$35.56 |
$40.46 |
$41.30 |
$35.17 |
$37.81 |
142FC, 144FC, 166FC |
$49.00 |
$54.32 |
$55.30 |
$46.26 |
$50.29 |
325, 330, 335, 340, 350, 375, 385 |
$14.56 |
$19.46 |
$20.30 |
$14.17 |
$16.81 |
325F, 330F, 335F, 340F, 350F, 375F, 385F |
$25.76 |
$30.66 |
$31.50 |
$25.37 |
$28.01 |
325FC, 330FC, 335FC, 340FC, 350FC, 375FC, 385FC |
$28.56 |
$33.46 |
$34.30 |
$28.17 |
$30.81 |
342, 344, 366 |
$28.00 |
$33.32 |
$34.30 |
$25.26 |
$29.29 |
342F, 344F, 366F |
$39.20 |
$44.52 |
$45.50 |
$36.46 |
$40.49 |
342FC, 344FC, 366FC |
$42.00 |
$47.32 |
$48.30 |
$39.26 |
$43.29 |
500 |
$16.66 |
$21.28 |
$23.24 |
|
$19.15 |
|
SQUARE FOOT pricing for "finished" doors and drawer fronts:
(note: if B or V panel selected, pricing is $5.60 more per sq. ft.)
To keep the math simple, and our typing much less, use all the "unfinished" wood door pricing from above
and add $8.26 per sq. ft. for any wood choice in any of the allowed finish options for that wood choice.
Paint grade doors come unfinished ONLY.
|
SQUARE FOOT pricing for "glazed finished" doors and drawer fronts:
(note: if B or V panel selected, pricing is $5.60 more per sq. ft.)
Again, to keep the math simple, and our typing much less, use all the "unfinished" wood door pricing from above
and add $18.48 per sq. ft. for maple, cherry, and hickory wood choices. Glaze colors are: (chocolate,
bronze, mocha, or almond). Glazing is not done on oak selections. This means that glazing add $10.22 /sq. ft. above the normal finishing price. Glazing is a hand applied process and more labor intensive.
Plywood cannot be glazed, some molding choices cannot be glazed, veneer cannot be glazed. ***When we compared Woodmont Doors pricing to that of Quality Doors that we used to offer, Woodmont is 20% lower on almost
every item.
|
SQUARE FOOT pricing for any of the above when your door width exceeds 26" wide,
or your door height exceeds 48" tall.
Add $7.00 to all sq. ft. amounts above. This is just the standard oversized premium.
Doors over 26" wide will be two panel. Doors over 48" tall will be two panels.
If doors both over 26" wide and 48" tall, add $21.00 to the sq. ft. pricing. These are considered huge cabinet doors and they will be FOUR panel doors.
(note: if B or V panel selected, pricing is $5.60 more per sq. ft.)
|
How to order series 100 raised panel doors:
- Select your door design: designs 125, 135, 140, 142, 144, 150, 166, 175, 185
- Select a wood choice: Red Oak, Maple, Cherry, Hickory, or paint grade
- Select: unfinished or finished. If finished, tell us which finish
- If finished and you want a glaze finish too, be certain to state the glaze color
- Select a panel profile from the graphic shown higher on this page
- Enter all your door quantities and sizes in inches (examples: 15-1/4, 32-1/16, 6-1/2, no need for " marks)
- If you need drawer fronts, state the design: 125F, 125FC, 150F, etc., or 500-(edge choice) - lots of DF choices
- Enter all your drawer front quantities and sizes
- If you need the doors bored for concealed hinges, state boring option #1 or #2
- If you need hinges for a 1/2" overlay on a face frame mount, get them now
- Enter any accessory items such as mouldings, veneer, or plywood (shown on that respective page)
On-line ordering page or quotation requests
How to order series 300 plywood panel doors:
- Same as everything above except door designs numbers are begin with 3, not 1
- Drawer fronts are designs 325F, 350F, 350FC, 385F, etc., or 500-(edge choice).
- And the panel is a default flat plywood panel, or plywood panel B for the beadboard look.
- The B plywood panel in any door adds $5.60 to the sq. ft. pricing.
|
We are trying to keep the doors as easy as possible to order. That's why there is information on this page about finishes, hinge boring, profiles, etc. The mullion door page will explain mullion and frame
only doors in more depth. The mouldings page will show your moulding choices, veneer choices, and information on cut to size plywood. There are other helpful information pages and links to these pages are at the top and
bottom of all our Woodmont Doors pages.
|
Below are a few pictures we took to help you with your choices:
captions are contained within the pictures.
|
PROCEED TO:
|
PROCEED TO:
|
|
