|
Woodmont Doors
Series 400 M&T plywood panel wood cabinet doors |
Series 400 plywood panel M&T corner doors and corresponding drawer fronts will both be shown on this web page. Profile selection diagrams will also be shown.
|
Design 400 door, S frame RB edge.
Shown in Harvest Oak finish.
Min. width 6-1/2", min. height 6-1/2"
|
Design 400 door, S frame RB edge, with B beaded panel.
Shown in Harvest Oak finish.
Min. width 6-1/2", min. height 6-1/2"
|
Design 401 door, S frame RB edge.
Shown in Harvest Oak finish.
Min. width 7", min. height 8"
|
Design 401 door, S frame RB edge, with B beaded panel.
Shown in Harvest Oak finish.
Min. width 7", min. height 8"
|
Design 405 door, S frame RB edge.
Shown in Harvest Oak finish.
Min. width 7", min. height 8"
|
Design 405 door, S frame RB edge, with B beaded panel.
Shown in Harvest Oak finish.
Min. width 7", min. height 8"
|
Design 400 door, E3 frame, SQ edge.
3" wide frame choice. Available on all series 200 and 400 door frames.
Standard size is 2-1/8". Mid size is 2-3/8".
2-3/8" and 3" frames carry an upcharge.
Shown in Cider Cherry finish.
Min. width 8-1/4", min. height 8-1/4" because of the 3" wide frame choice.
|
Design 400 door, E3 frame, SQ edge.
3" wide frame choice. Available on all series 200 and 400 door frames.
Standard size is 2-1/8". Mid size is 2-3/8".
2-3/8" and 3" frames carry an upcharge.
Shown in Cordovan Cherry finish.
Min. width 8-1/4", min. height 8-1/4" because of the 3" wide frame choice.
|
Design 400 door, E frame SQ edge.
The ever popular Shaker style door.
Shown in Autumn Oak finish.
Min. width 6-1/2", min. height 6-1/2"
Design 500-SHA slab drawer front shown above door.
Min. height requirement for this style of drawer front is 3-1/2"
5-piece plywood panel drawer fronts for design 400FC shown to the right must be at least 4-1/2" tall. For design 400F drawer front where all 4 frames pieces are the same width, min. height is 6-1/2". If you
increase the frame widths as shown to the right, then the min. height and width requirements increase also.
Autumn Oak veneer on face frame.
|
Design 400 door, E3 frame, SQ edge.
Design 400FC S3-SQ drawer front. Notice that top and bottom rails
are narrower than left and right rails.
3" wide frame choice. Available on all series 200 and 400 door frames. Standard size is 2-1/8". Mid size is 2-3/8".
2-3/8" and 3" frames carry an upcharge.
Shown in Cider Cherry finish.
Door: Min. width 8-1/4", min. height 8-1/4" because of the 3" wide frame choice.
Drawer front: Min. width 8-1/4", min. height 6-1/4" because of the 3" wide frame choice.
Drawer front 400FC made with the normal 2-1/8" wide frame has a min. height requirement of 4-1/2".
|
Design 400 door, E frame SQ edge.
The ever popular Shaker style door.
Shown in Natural Maple finish.
Min. width 6-1/2", min. height 6-1/2"
|
Drawer front design 400FC E3-SQ
Min. width for E3 frame 8-1/4", min. height 6-1/4"
Drawer front 400FC made with the normal 2-1/8" wide frame has a min. height requirement of 4-1/2".
Shown in Cider Cherry finish.
Shown in Cordovan Cherry finish.
Shown in Ginger Cherry finish.
|
Design 410 double shaker style door. Shown in natural finished maple with frame profile Q and edge RAD.
Min. width 11", min. height 9"
|
Close up of profiles for design 410 shaker door.
|
Frame profiles for the above RAISED PANEL door designs: 400, 401, 405. And series 200 doors.
Panel choices are smooth plywood or beaded plywood.
Smooth plywood is the default panel unless panel B is requested.
(note: if B panel selected, pricing is $5.60 more per sq. ft.)
Edge profiles for door designs 400, 401, and 405. And for series 200 doors.
For 400 series doors, these have a plywood panel. Your plywood panel options are smooth or beaded. The beaded plywood panel is not the
same panel as the beaded raised panel choice. The beaded raised panel choice technically is not a raised panel, but it is thicker and solid wood.
Above diagram shows the 4 basic series and how the panel choice fits into the frame choice, and then the edge profile is the very perimeter of the
entire door. Not all options are available on all doors. The above diagram is for reference for all door series.
|
All doors are available in Red Oak, Maple, Cherry or Hickory woods. Paint grade available too.
Doors can be ordered unfinished, or you can request finishing from the choices below.
If you would like a glazed finish, glaze colors are chocolate, bronze, mocha, and almond.
Paint grade doors come unfinished only, they are fine sanded and ready for you to paint.
PLEASE NOTE: Finish choices are restricted by wood species.
Autumn Oak, Nutmet Oak, Harvest Oak, and Charcoal Oak are Oak wood finish options.
Harvest Maple, Natural Maple, Toffe Maple, Ginger Maple, Champagne
Maple, Cider Maple, Cordovan Maple, and Espresso Maple are Maple wood finishes.
Cider Cherry, Cordovan Cherry, Ginger Cherry, and also Natural Cherry are Cherry wood finishes.
Cider Hickory, Natural Hickory, and Autumn Hickory are Hickory wood finishes.
|
If you would like your doors bored for concealed 35mm cup hinges,
please select boring option #1 or option #2 as shown below.
**For designs 401 or 405, state BL (bore left); BR (bore right); BP (bore as pairs).
Hinges for 1/2" overlay on a face frame edge mount are available from Woodmont Doors.
Hinge boring is $2.10 per door, conceal hinges WD-900CD are $5 per pair.
To view actual pictures of the hinges, and other concealed hinge options, please select this link.
|
How to calculate square footage:
Multiple your width in inches by your height in inches, divide by 144, round off to the second decimal place.
Example: your door is 15-7/8" wide x 27-9/16" tall. (15.875 x 27.5625)/144 = 3.04 sq. ft.
If you are uncertain how to determine the decimal equivalent of a fraction,
just divide the top number by the bottom number.
Examples: 7/8 is 7 divided by 8 = .875. Or 13/16 is 13 divided by 16 = .8125. Square foot calculations for frame only or mullion doors is different and described on the mullion door page. How to calculate the price of a door or drawer front:
Take the square foot pricing from the various charts below and multiply by the sq. ft. calculation.
Doors over 48" tall or 26" wide carry a $7.00 per sq. ft. oversize charge. If doors are both over 48" tall and 26"
wide, they will have an upcharge of $21.00 per sq. ft.
**Door using the B panel or B plywood panel are $5.60 more per sq. ft. from the prices shown in the charts below.
How to calculate shipping on doors, drawer fronts, and plywood:
Within the continental 48 US States, $1.20 per sq. ft. no matter what door design or wood choice.
A $10 minimum shipping charge applies to all small orders under 8.35 square feet. Please remember, we will quote out your request for you if you would like to submit your information on-line. Pricing: |
SQUARE FOOT pricing for "unfinished" doors and drawer fronts:
(note: if B panel selected, pricing is $5.60 more per sq. ft.)
Door design 410 is a double shaker style door, not shown above.
Door/DF design |
Red Oak |
Maple |
Cherry &
Hickory |
paint grade
w/MDF panel |
paint grade
w/wood panel |
400 |
$13.02 |
$14.98 |
$20.02 |
$11.98 |
$13.48 |
401 & 405 |
$14.28 |
$16.66 |
$21.70 |
$13.33 |
$14.99 |
410 |
$16.66 |
$18.62 |
$24.08 |
$14.90 |
$18.62 |
400F |
$24.22 |
$26.18 |
$31.22 |
$23.18 |
$24.68 |
400FC |
$27.02 |
$28.98 |
$34.02 |
$25.98 |
$27.48 |
500 |
$16.66 |
$21.28 |
$22.24 |
|
$19.15 |
|
SQUARE FOOT pricing for "finished" doors and drawer fronts:
(note: if B panel selected, pricing is $5.60 more per sq. ft.)
To keep the math simple, and our typing much less, use all the "unfinished" wood door pricing from above
and add $8.26 per sq. ft. for any wood choice in any of the allowed finish options for that wood choice.
Paint grade doors come unfinished ONLY.
|
SQUARE FOOT pricing for "glazed finished" doors and drawer fronts:
(note: if B panel selected, pricing is $5.60 more per sq. ft.)
Again, to keep the math simple, and our typing much less, use all the "unfinished" wood door pricing from above
and add $18.48 per sq. ft. for maple, cherry, and hickory wood choices. Glaze colors are: (chocolate,
bronze, mocha, or almond). Glazing is not done on oak selections. This means that glazing add $10.22 above the normal finishing price. Glazing is a hand applied process and more labor intensive.
Plywood cannot be glazed, some moulding choices cannot be glazed, veneer cannot be glazed.
Plain frames and plain edges on series 200 and 400 doors cannot be glazed, only the more fancy choices. ***When we compared
Woodmont Doors pricing to that of Quality Doors that we used to offer, Woodmont is 20% lower on almost every item.
|
SQUARE FOOT pricing for any of the above when your door width exceeds 26" wide,
or your door height exceeds 48" tall.
Add $7.00 to all sq. ft. amounts above. This is just the standard oversized premium.
Doors over 26" wide will be two panel. Doors over 48" tall will be two panels.
If doors both over 26" wide and 48" tall, add $21.00 to the sq. ft. pricing. These are considered huge cabinet doors and they will be FOUR panel doors.
(note: if B panel selected, pricing is $5.60 more per sq. ft.)
|
How to order series 400 plywood panel doors:
- Select your door design: designs 400, 401, 405, or 410 (double shaker)
- Select a wood choice: Red Oak, Maple, Cherry, Hickory, or paint grade
- Select: unfinished or finished. If finished, tell us which finish
- If finished and you want a glaze finish too, be certain to state the glaze color
- Select a frame profile from the graphic shown higher on this page (default frame size is 2-1/8")
- 2-3/8" and 3" wide frames are available upon request at an upcharge
- Panel profile is plain plywood panel, unless you request the B panel for the beaded plywood panel
- Select an edge profile form the graphic shown higher on this page
- Enter all your door quantities and sizes in inches (examples: 15-1/4, 32-1/16, 6-1/2, no need for " marks)
- If you need drawer fronts, state the design: 400F, 400FC, or 500-(edge choice)
- Enter all your drawer front quantities and sizes
- If you need the doors bored for concealed hinges, state boring option #1 or #2
- If you need hinges for a 1/2" overlay on a face frame mount, get them now
- Enter any accessory items such as mouldings, veneer, or plywood (shown on that respective page)
On-line ordering page or quotation requests |
We are trying to keep the doors as easy as possible to order. That's why there is information on this page about finishes, hinge boring, profiles, etc. The mullion door page will explain mullion and frame
only doors in more depth. The mouldings page will show your moulding choices, veneer choices, and information on cut to size plywood. There are other helpful information pages and links to them are at the top and bottom
of all our Woodmont Doors pages.
|
Below are a few pictures we took to help you with your choices:
captions are contained within the pictures.
|
PROCEED TO:
|
PROCEED TO:
|
|
