|
Woodmont Doors
Series 800 RTF raised panel and slab rigid thermal foil cabinet doors |
Woodmont Series 800 RTF rigid thermal foil doors and corresponding drawer fronts will both be shown on this web page. Profile selection diagrams will also be shown.
AFTER the Woodmont Doors photos that we took will be old Quality Doors cross reference information to assist former Quality Doors customers. We can help with many of the Quality Doors designs that were discontinued in December of 2009.
|
Normal square top design: style 800.
|
LEFT: Design 800 raised panel RTF door, C2-113 profiles, shown in Matte White RTF finish.
ABOVE: close up of the C2 inside pass profile and the 113 perimeter edge.
As you can see from the upper left side of the photo, matte white will have a minor amount of shine to it. Matte White is a bright white finish with a satin sheen.
Minimum sizes for design 800 door:
C2-113 profile width 7-3/8" x height 7-3/8".
C3-113 profile width 7-1/2" x height 7-1/2"
C4-191 profile width 7-7/8" x height 7-7/8".
Maximum size is 31" wide by 90" tall.
For matching raised panel drawer fronts, request them as either:
design 800F - same min. requirements as design 800 door;
or as design 800FC reduced rail. Min. height requirements:
C2 = 5-3/8"; C3 = 5-1/2"; C4 = 6-3/8".
For a slab drawer face, order as 8DF-113. Min. width 3" x height 3". |
Design 801 cathedral top door. Shown with C4-191 profiles, antique white.
|
LEFT: Design 801 raised panel RTF door, C4-191 profiles, antique white RTF.
Minimum size for design 801 door:
C2-113 profile width 10-3/8" x height 10-3/8".
C3-113 profile width 10-1/2" x height 10-1/2"
C4-191 profile width 10-7/8" x height 10-7/8".
Maximum size is 31" wide by 90" tall.
For matching raised panel drawer fronts, request them as either:
design 800F - same min. requirements as design 800 door;
or as design 800FC reduced rail. Min. height requirements:
C2 = 5-3/8"; C3 = 5-1/2"; C4 = 6-3/8".
Note: drawer fronts are square top, no arches.
For a slab drawer face, order as 8DF-113. Min. width 3" x height 3".
|
Roman arch style door: design 801.
|
LEFT: Design 805 raised panel RTF door, C3-113 profiles, shown in Almond RTF finish.
ABOVE: close up of the C3 inside pass profile and the 113 perimeter edge.
As you can see from the upper left side of the photo, almond RTF will have a minor amount of shine to it. Almond is a deep ivory color with a satin sheen.
Minimum size for design 805 door:
C2-113 profile width 10-3/8" x height 10-3/8".
C3-113 profile width 10-1/2" x height 10-1/2"
C4-191 profile width 10-7/8" x height 10-7/8".
Maximum size is 31" wide by 90" tall.
For matching raised panel drawer fronts, request them as either:
design 800F - same min. requirements as design 800 door;
or as design 800FC reduced rail. Min. height requirements:
C2 = 5-3/8"; C3 = 5-1/2"; C4 = 6-3/8".
Note: drawer fronts are square top, no arches.
For a slab drawer face, order as 8DF-113. Min. width 3" x height 3".
|
Beaded Shaker style door: 800 S5-118.
|
LEFT: Design 800 beaded panel Shaker RTF door, S5-118 profiles, shown in Woodgrain White RTF finish.
ABOVE: close up of the S5 inside pass profile and the 118 perimeter edge. S5-118 profile combination is the popular "beaded shaker style door."
Woodgrain White is a bright white finish with a satin sheen. Woodgrain White and Matte White are the same color, but Woodgrain white has a woodgrain appearance.
Minimum size for design 800 S5-118 door: width 8" x height 8".
Maximum size is 31" wide by 60" tall.
For matching beaded shaker style drawer fronts, request them as:
design 800F S5-118 = all four rails same as door, min. size 8" x 8";
or as design 800FC S5-118. Min. height requirement 4-1/2".
For a slab drawer face, order as 8DF-118. Min. width 3" x height 3".
|
Shaker style door: 800 S4-118.
|
LEFT: Design 800 shaker style RTF door, S4-118 profiles, shown in Autumn Oak RTF finish.
ABOVE: close up of the S4 inside pass profile and the 118 perimeter edge.
Autumn Oak RTF is the common honey looking or golden oak tone color. Note, Woodmont Doors version of Autumn Oak does not contain that reddish hue that Quality Doors version of Lite Oak had. Not an exact match.
Minimum size for design 800 door: width 8" x height 8".
Maximum size is 31" wide by 60" tall.
For matching shaker style drawer fronts, request them as:
design 800F S4-118 = all four rails same as door, min. size 8" x 8";
or as design 800FC S4-118. Min. height requirement 4-1/2".
For a slab drawer face, order as 8DF-118. Min. width 3" x height 3".
|
ABOVE: Design 800FC raised panel RTF drawer front, C4-118 profiles, shown in Almond RTF finish.
RIGHT: close up of the C4 inside pass profile and the 118 perimeter edge.
Minimum sizes for design 800FC drawer front:
widths: C2 = 7-3/8"; C3 = 7-1/2"; C4 = 7-7/8".
heights: C2 = 5-3/8"; C3 = 5-1/2"; C4 = 6-3/8".
For matching raised panel doors, request them as design 800 C4-118.
|
Notice how the top and bottom rails are narrower. This is how the 800FC drawer fronts are made. Left and right frame rails are identical width to the doors. But top
and bottom rails are narrower. Close up of the C4 inside profile above.
If you want all 4 rails to be the same, note the minimum height requirements and order as 800F (same as 800 doors).
|
|
LEFT: Design 800 slab face RTF door, S2-191 profiles, shown in Pear RTF finish. (Very similar to Cherry grain.)
ABOVE: close up of the 191 perimeter edge.
Minimum size for design 800 door with "S2" profile: width 3" x height 3".
Maximum size is 31" wide by 90" tall.
For matching slab drawer face, order as 8DF-191. Min. width 3" x height 3".
Note: grain on doors runs vertical. Grain on drawer fronts will run horizontally. This is true of all RTF designs. |
|
LEFT: Design 800 slab face RTF door, S2-112 profiles, shown in Natural Maple RTF finish. (Very blonde maple.)
ABOVE: close up of the 112 perimeter edge.
Minimum size for design 800 door with "S2" profile: width 3" x height 3".
Maximum size is 31" wide by 90" tall.
For matching slab drawer face, order as 8DF-112. Min. width 3" x height 3".
Note: grain on doors runs vertical. Grain on drawer fronts will run horizontally. This is true of all RTF designs.
|
|
LEFT: Design 800 raised panel RTF door, C2-113 profiles, shown in Pickled Maple RTF finish.
ABOVE: close up of the C2 inside pass profile and the 113 perimeter edge.
Pickled Maple is a white wash maple look.
Minimum sizes for design 800 door:
C2-113 profile width 7-3/8" x height 7-3/8".
C3-113 profile width 7-1/2" x height 7-1/2"
C4-191 profile width 7-7/8" x height 7-7/8".
Maximum size is 31" wide by 90" tall.
For matching raised panel drawer fronts, request them as either:
design 800F - same min. requirements as design 800 door;
or as design 800FC reduced rail. Min. height requirements:
C2 = 5-3/8"; C3 = 5-1/2"; C4 = 6-3/8".
For a slab drawer face, order as 8DF-113. Min. width 3" x height 3". |
|
When considering your drawer front choice to go with your doors, basically you have 2 choices. A corresponding raised panel front or matching shaker style front to go with the
shaker style doors - as long as your height requirement permits.
Or, just a slab drawer front. Slab means flat face. There is no raised panel or sunken panel profile. The drawer front is just flat, and then you would
request it with a matching edge to go with your doors. Shown to the left is a raised panel front above a Roman arch top door. We do not have a lot of samples to show a proper combination. This picture more or less was
grouped because of the color of the drawer front and the door. Normally, base cabinet doors are square top and you have your drawer fronts above those. Arch top doors are a common mix for your upper cabinets. But the
choices are yours to do as you like. A kitchen full of slab doors is a very nice look. Installing raised panel doors, but then slab drawer fronts is one of the most popular combinations out there. You have many design
choices that you can do. And it is your choice. There are no set rules about how it should be done. Just don't mix things up that really do not go together. As always, if you have any questions, you can e-mail us. NOTES:
Drawer front design 800F has 4 equal size rails. It is the same as design 800 door. BUT, doors have vertically running grain for woodgrain
patterns. An 800F drawer front will have a horizontally running grain. Design 800FC will have reduced top and bottom rails to allow for shorter height requirements. All minimum heights are listed above. Design 8DF
slab drawer front can go with anything and allows for some really small sizes. |
Inside pass profiles and edge profiles for RTF door selections.
 
NOW FOR THE IMPORTANT STUFF to know about the RTF doors shown above.
Basically, there are only three door styles shown above: 800, 801, and 805.
Designs 800, 801, and 805 can be made with ANY of the pass profile and edge profile choices that you would like.
Thus C2, C3, and C4 can be requested in square top doors(800), cathedral top(801), and Roman arch top(805).
The 112, 113, 118, and 191 edge choices can be made with any of the pass profiles. If you want a C4-191 or a C4-113, or whatever, you can have it. Mix them up.
Design 800 S2 slab door can be made with edges 112, 113, 118, or 191. Request it how you like it.
Design 800 S4-118 door comes only with the 118 edge. This is the specialty shaker style door.
Design 800 S5-118 comes only this way. This is the specialty beaded shaker style door.
800F drawer fronts will have 4 equal size frame rails, matching to the doors. 800FC will have narrower top and bottom rails. 8DF are slab drawer fronts.
Every door design is available in all 8 RTF colors shown below.
Any question? Please e-mail us.
|
RTF Color selection:
Matte white and white woodgrain are bright whites, but not glossy. On the white woodgrain, you will see a grain pattern.
The antique white is more like a bone color; it is an off white. Almond is darker than antique white.
The woodgrain colors are displayed well below.
The images shown below are actual scans of the RTF material. They are good representations.
(The dark streak in the bottom right corner of each color is dirt on the bottom of our scanner glass that we cannot clean - ignore it.)
Matte White
|
White Woodgrain
|
Antique White
|
Almond
|
Natural Maple
|
Pickled Maple
|
Autumn Oak
|
Pear
|
|
Old Quality Doors help is still farther down the page. If you would like your doors bored for concealed 35mm cup hinges,
please select boring option #1 or option #2 as shown below.
**For designs 801 or 805, state BL (bore left); BR (bore right); BP (bore as pairs).
Hinges for 1/2" overlay on a face frame edge mount are available from Woodmont Doors.
Hinge boring is $2.10 per door, concealed hinges WD-900CD are $5 per pair.
To view actual pictures of the hinges, and other concealed hinge options, please select this link.
|
How to calculate square footage:
Multiple your width in inches by your height in inches, divide by 144, round off to the second decimal place.
Example: your door is 15-7/8" wide x 27-9/16" tall. (15.875 x 27.5625)/144 = 3.04 sq. ft.
If you are uncertain how to determine the decimal equivalent of a fraction,
just divide the top number by the bottom number.
Examples: 7/8 is 7 divided by 8 = .875. Or 13/16 is 13 divided by 16 = .8125. Square foot calculations for frame only or mullion doors is different and described on the mullion door page. How to calculate the price of a door or drawer front:
Take the square foot pricing from the chart below and multiply by the sq. ft. calculation.
Extremely larger doors will have additional shipping charges due to the way they must be packed and shipped. Extremely large is considered over 60" tall.
How to calculate shipping on RTF doors and drawer fronts:
Within the continental 48 US States, $1.20 per sq. ft. no matter what door design or wood choice.
A $10 minimum shipping charge applies to all small orders under 8.35 square feet. Please remember, we will quote out your request for you if you would like to submit your information on-line. Pricing: |
SQUARE FOOT pricing for RTF doors and drawer fronts: For Matte White, Antique White, and Almond solid color RTF colors:
Door/DF design |
C2 profile |
C3 profile |
C4 profile |
S2 profile |
S4 profile |
S5 profile |
800 |
$15.00 |
$16.50 |
$20.25 |
$15.00 |
- |
- |
801 & 805 |
$16.00 |
$17.50 |
$21.25 |
- |
- |
- |
800 S4-118 |
- |
- |
- |
- |
$20.25 |
- |
800 S5-118 |
- |
- |
- |
- |
- |
$24.75 |
800F drawer front |
$30.00 |
$31.50 |
$35.25 |
- |
$35.25 |
$39.75 |
800FC drawer front |
$32.00 |
$33.50 |
$37.25 |
- |
$37.25 |
$41.75 |
8DF slab drawer front |
$15.00 |
- |
- |
$15.00 |
- |
- |
For Woodgrain RTF color selections:
Pickled Maple, Natural Maple, Pear, Autumn Oak, and White Woodgrain:
Add $1.50 to all square foot pricing shown directly above.
|
|
How to order series 800 RTF (rigid thermal foil) doors:
- Select your door design: designs 800, 801, 805
- Select an RTF color choice: Matte White, Antique White, Almond, Woodgrain White, Natural Maple, Pickled Maple, Autumn Oak, or Pear
- Select a pass profile from the graphic shown higher on this page: C2, C3, C4, S2, S4, S5
- Select an edge profile form the graphic shown higher on this page: 112, 113, 118, 191 (note restrictions above for shaker theme doors)
- Enter all your door quantities and sizes in inches (examples: 15-1/4, 32-1/16, 6-1/2, no need for " marks)
- If you need drawer fronts, state the design: 800F, 800FC, or 8DF slab and then your pass profile and edge choice (most likely same as the doors)
- Enter all your drawer front quantities and sizes
- If you need the doors bored for concealed hinges, state boring option #1 or #2
- If you need hinges for a 1/2" overlay on a face frame mount, get them now
On-line ordering page or quotation requests |
Information about ordering frame only or mullion RTF doors: Frame only doors are a door with a big hole in the middle for your glass panel. It is just the top, bottom, and
left and right frame rails with one large opening. Mullion doors are the same frame but with mullion rails to create multiple openings within the entire large opening. Any of the above raised panel or shaker panel RTF
doors can be ordered as frame only (FO) or as mullion doors. Mullion doors can be 4-lite, 6-lite, 8-lite, and on square top doors only, you could have 9-lite too (3 rows and 3 columns). Styles 801 and 805 will have only
2 columns, but can have 2, 3, or 4 rows of lites. Pricing on frame only and mullion doors
is priced at twice the square foot pricing shown in the chart above. BUT the difference is sq. ft. calculations are based on a 9" width multiplier frame only and mullion doors, then each mullion lite on mullion doors will add $9.40 to the door price. Thus if you request a 4-lite door (ML4), that will add $37.60 to the door price after calculating the square footage and multiplying that by the twice the sq. ft. pricing above. We will be happy to quote any doors in advance for you. Please use our on-line quotation request form.
Maximum size on any frame only or mullion RTF door is 31" x 60".
Minimum size requirements vary a little by what is shown for solid panel doors above. Most are about an inch larger in height and width. 
RTF Refacing accessories: RTF refacing sheets:
Thermal foil (PSA) pressure sensative adhesive backed sheets in 24" x 96" are available.
$112.00 per 24x96 sheet in any RTF color shown above. RTF plywood - cut to size
minimum size 3-1/2" width, 3-1/2" height.
maximum size 48" width, 96" height.
Grain (woodgrain patterns) runs with the height dimension.
(Note: grain is understood to be vertical. If using horizontally, grain still runs with the measurement defined as height.
Thus, when used for toekick, you can order as 3-1/2" x 96", or 4" x 96" [or any length]. Grain runs with the long measurement.)
Priced at $8.12 per sq. ft.
RTF moulding selections:
part number |
description |
price per 8' stick |
WD-M1-RTF |
inside corner cove |
$22.75 |
WD-M3-RTF |
medium crown moulding |
$73.50 |
WD-M6-RTF |
large classic crown moulding |
$105.00 |
WD-M8-RTF |
scribe |
$22.75 |
WD-M9-RTF |
shoe |
$22.75 |
WD-M13-RTF |
batton |
$22.75 |
All moulding pieces come in 8' lengths only. |
|
Quality Doors old RTF door information:
We had offered Quality Doors from 2001 through their shutdown in December of 2009. With their shutdown,
it did present some obstacles in offering high quality custom sized doors. Fortunately, Woodmont Doors has expanded their Thermal Foil door selections to match several of the Quality Doors styles and to offer some close
substitutes on a few more designs. The two graphics below we have created to help you to know Woodmont Doors RTF doors a little better and how the designs compare to Quality Doors. After the two graphics, we will
explain some of our notes on the graphics and some data about the RTF color cross references.
Please note: the Woodmont Doors pass profile diagrams are shown higher above on this page.
The two graphics above were created by Eclectic-ware and are for exclusive use on our web site only.
Notes about Woodmont Doors to Quality Doors comparisons:
Door designs are the same:
WD's 800 is QD's 700, the 801 is the 701, the 805 was QD's 716.
Profiles: WD's C2 is the same look as QD's C2, but it is not quite as wide.
WD's C3 is exclusive to Woodmont, it does not match any QD pass profiles.
WD's C4 is a good substitute for WD's HV3, but it is not identical. There are a few contour differences.
WD's S2 slab is the same as QD's 77R2, 112 edge is identical too.
WD's S4 shaker style, and the S5 beaded shaker style are 99% matches. The reason we
say 99% is because the WD frame rails measure 2" and the QD frame rails measure 2-1/16". If you measure
them side by side you can tell this. If you do not measure them, you cannot tell the difference.
WD's 112 edge matches QD's 112, the 113 matches the 113, the 118 matches QD's 115.
The 191 edge is a very close match to QD's 191, but not an exact match.
Colors:
WD's matte white is a spec more brighter and crystal-like than QD's matte white, but an excellent substitute.
WD's woodgrain white seems to be a 100% match to QD's woodgrain matte white.
WD's antique white is a 98 to 99% match to QD's antique white.
WD's almond is an exact match to QD's almond.
WD's pear is an exact match to QD's pear.
WD's Autumn Oak is a little lighter and more on the brown tone than QD's Lite Oak. No reddish hue.
WD's Natural Maple is a little lighter and much better looking that QD's natural maple.
WD's pickled maple is a cross between QD's Sanibel Maple and Dunwood. The pickled maple looks
more like a natural whitewash color but without that pinkish hue to it.
Woodmont does not have a match to the Dunwood or Sanibel Maple. Their pickled maple is meant as
a sub for either, but it does not match either.
If you are looking to add a door or two to your kitchen that has Quality Doors in it, some Woodmont
designs can fill that need, some are close, and you could be out of luck if none of the above info helped.
The reason we have the above data is because we compared our old Quality Doors sample doors to the
sample doors we received from Woodmont. So all of the above references are from us and no other
source. And we did double check our comparisons. This is the most accurate data you will find.
|
PROCEED TO:
|
PROCEED TO:
|
|
